MAGUS CLM50 Digital Camera

The MAGUS CLM50 digital camera is designed for use in fluorescence and darkfield microscopy techniques. The camera is equipped with a 1.7MP sensor and delivers realistic images with a 1600x1100px resolution when viewed with 60x and 100x objectives. Video is recorded at 33fps at maximum resolution. Videos are smooth with soft and subtle transitions between frames. The movement of the sample is displayed in real time with no delays. The camera makes it easy to work with objects that are moving and is suitable for classroom demonstrations. The camera is equipped with a USB3.0 interface. The data transfer speed is 10 times faster than USB2.0 cameras. The high-speed camera is recommended for professional laboratories research or university training.

Sensor

The camera is equipped with a SONY Exmor backlit color CMOS sensor. This technology increases light sensitivity and improves camera performance in low-light conditions. A color sensor has less light sensitivity than a monochrome one but it is absolutely necessary for studies that identify and classify objects based on color. The large size sensor – 1.1''. The size of the sensor affects the image quality: The larger the sensor is the cleaner the image the greater the color depth and the wider the field of view will be. The sensor with 9x9µm pixels provides light sensitivity of 4910mV with 1/30s. To achieve the maximum field of view without distortion we recommend using an adapter with a magnification of 1x.

Peltier element

The camera sensor may overheat during prolonged use. This causes thermal noise in the image which significantly reduces the image quality. To eliminate this negative effect the chamber is equipped with a two-stage thermoelectric module (Peltier element). It sets the temperature to 42°C below room temperature and creates optimal conditions for the sensor to run for long periods of time without heating up and therefore the camera is suitable for long shutter speeds: The image is clear without thermal noise.

Shutter

The camera has a global shutter. The signal is read from all of the photosensitive elements of the sensor simultaneously. Fast-moving objects are seen clearly and without false optical effects. The image in low light is bright and well-detailed which is especially important for fluorescence microscopy.

Software features

The camera uses software to display images on an external display take photographs record video edit images and measure the linear and angular dimensions of samples and their structures. Before taking measurements the software must be calibrated for each objective with a calibration slide.

Installation

The camera is mounted on the microscope in the trinocular tube/camera port using the C-mount adapter (included).

Key features:

• For fluorescence and darkfield microscopy with 60x and 100x objectives
• 1.7MP resolution for getting detailed images at higher magnification; low noise level low-power dissipation
• 33fps for observing moving objects recording video and moving the sample without jerkiness or delays
• Peltier element reduces sensor temperature during prolonged operation and eliminates thermal noise and therefore long shutter speeds can be used when taking photos
• Global shutter for fast signal readout from the sensor increased image brightness no false optical effects when observing moving samples
• SONY Exmor color CMOS backlit sensor provides low noise level and high light sensitivity even in low-light conditions. You will get clearer brighter and more color-saturated images.
• USB3.0 interface for fast smooth data transfer
• Software with photo video recording editing external display functions linear and angular measurements

The kit includes:

• Digital camera
• USB cable
• 12V 3A adapter
• Case
• Installation CD with drivers and software
• User manual and warranty card