A maioria das nossas encomendas são enviadas em 2 dias úteis*.
Temos uma política de devolução de 14 dias. Se não estiver satisfeito com a sua compra, devolva-a na sua embalagem original e certifique-se de que coloca a embalagem original do produto dentro da caixa de envio para evitar quaisquer danos. Todos os artigos devem estar nas suas condições originais e não devem ser utilizados. O valor da sua compra será reembolsado. As despesas de envio não serão reembolsadas.
The Ermenrich Test DM70 is designed for professionals who work with electrical systems and electronics. It suits engineers, electricians, repair technicians, and commissioning specialists. The model combines a voltmeter, ammeter, ohmmeter, capacitance meter, frequency meter, and thermocouple, supports True RMS, and has a non-contact NCV detector with vibration and LED alerts. With this feature set, you can handle most diagnostic tasks without any extra tools.
The meter is built for a wide range of electrical measurements. It reads DC voltage on ranges from 600mV to 1000V and AC voltage on ranges from 6V to 1000V. This covers battery testing, control circuit diagnostics, and work on residential and industrial power systems, including three-phase lines and distribution panels. DC and AC current are measured on the 6A and 10A ranges, which is sufficient for checking the current draw of automotive components, heaters, and small motors. Resistance measurement is available on ranges from 600Ω to 60MΩ. The lower ranges are convenient for checking connection integrity and finding open circuits and shorts. The upper ranges are suited for measuring high-value resistors and detecting leakage.
Capacitance is measured on ranges from 40nF to 4mF, so the meter covers most capacitors that can be found in start circuits, power supplies, and household appliances. The thermocouple works from −20°C to +760°C. It lets you monitor the heating of contacts, motor windings, pipes, and heating elements. In continuity mode, the buzzer sounds when resistance drops below 100Ω. The frequency meter reads up to 10MHz and is suitable for checking switching power supplies, generators, sensors, and mains frequency.
The meter takes 2 readings per second and supports data hold and min/max recording. The 6000-count backlit display is easy to read in any lighting. With CAT III 600V and CAT II 1000V ratings, the model is cleared for work on industrial power systems and distribution panels. Power comes from a 9V 6F22 battery, good for up to 80 hours of operation. Auto power-off after 15 minutes of inactivity conserves battery life. The ABS housing with thermoplastic elastomer withstands heavy daily use.
Key features:
The kit includes:
| Brand | Ermenrich |
| Warranty | 5 years |
| EAN | 5905555028675 |
| Package size (LxWxH) | 17x12x6 cm |
| Shipping Weight | 0.45 kg |
| Selection of the measuring limit | automatic |
| Basic functions | ammeter, capacitance meter, frequency meter, ohmmeter, thermocouple, voltmeter |
| DC voltage measuring limit | 600mV/6V/60V/600V: accuracy ±(0.5%+2); 1000V: accuracy ±(1.5%+2) |
| AC voltage measuring limit | 6V/60V/600V: accuracy ±(1.5%+10); 1000V: accuracy ±(2.0%+10) |
| DC current measuring limit | 6A/10A: accuracy ±(2.5%+5) |
| AC current measuring limit | 6A/10A: accuracy ±(3.0%+5) |
| Resistance measuring limit | 600Ω: accuracy ±(1.2%+4); 6kΩ: accuracy ±(1.0%+2); 60kΩ/600kΩ: accuracy ±(1.2%+2); 6MΩ: accuracy ±(2.0%+2); 60MΩ: accuracy ±(5.0%+10) |
| Capacity measuring limit | 40nF: accuracy ±(5.0%+50); 400nF/4µF/40µF: accuracy ±(3.0%+5); 400µF/4mF: accuracy ±(5.0%+5) |
| Frequency measurement limits | 9.999Hz/99.99Hz: accuracy ±(1.5%+5); 999.9Hz/9.999kHz/99.99kHz/999.9kHz: accuracy ±(1.2%+3); 10MHz: accuracy ±(1.5%+4) |
| Temperature measurement range | –20…+760 °C |
| Measurements per second | 2 |
| Wire mapping | yes |
| Continuity test | +, combined with resistance measurement mode (<100Ω) |
| Diodes test | yes |
| Diode test | +, test current 0.3mA, open-circuit voltage 1.0V DC |
| Non-contact voltage detection (NCV) | yes |
| True RMS | yes |
| Throughput capacitance | 50–60Hz |
| Hold function | yes |
| Limit value function (Min/Max) | yes |
| Voltage polarity detection | yes |
| Display | LCD |
| Display counts | 6000 |
| Display backlight | yes |
| Audible alerts | yes |
| Light alert | yes |
| Safety standards | EN 61010-1 |
| Overvoltage category | CAT II 1000V, CAT III 600V |
| Operating humidity range, % | 0 — 70 |
| Storage temperature range,°C | -20 — 60 |
| Operating temperature range,°C | 0… +50 (+32… +122) |
| Power supply | 9V battery 6F22 - 1 pc. |
| Low battery status indicator | yes |
| Auto power off | yes |
| Auto power off | 15 min. |
| Body | high-strength ABS plastic, thermoplastic elastomer |
Temos uma política de devolução de 14 dias. Se não estiver satisfeito com a sua compra, devolva-a na sua embalagem original e certifique-se de que coloca a embalagem original do produto dentro da caixa de envio para evitar quaisquer danos.
Todos os artigos devem estar no seu estado original e não devem ser utilizados. O valor da sua compra será reembolsado. .
As despesas de envio não serão reembolsadas.
Se a devolução se dever a um produto defeituoso, poderá ser compensado pelo envio da devolução.
Se necessitar de efetuar uma devolução, contacte-nos para obter mais informações.
- De 0 a 2 kg - custo de envio: 12,50 euros.
- De 2.001 kg a 30 kg - custo de envio: 17,00 euros.
- A partir de 30,001 kg - custo de envio: 30,00 euros.
Em caso de recolha no nosso armazém ou pontos de revenda - o envio é gratuito.
Obrigado por subscrever!
Este e-mail foi registado!
