Ermenrich NetGeeks NU30 is an optical multimeter with VFL function which will become a must-have tool for a specialist in designing laying and installation of fiber optic communication lines. With this device you can measure the output power of the fiber optic system source...

Optical multimeter or optical power meter Ermenrich NetGeeks NU40 – an essential tool for professionals who install and maintain fiber-optic communication lines (FOCL). The device allows you to measure the absolute power find losses between two points in the line locate faults and indicate...

The Ermenrich NetGeeks NU20 optical multimeter is designed for testing fiber optic cables. You can measure the absolute optical power in any fiber optic system source measure the optical power lost in a cable and perform a continuity test to check if there are...

The Ermenrich NetGeeks NU10 optical multimeter is a compact device for testing fiber-optic communication lines. You can measure the absolute optical power or relative loss of optical power between two points in the fiber optic cable. The device is useful to those who install...

The Ermenrich NetGeeks NL70 Cable Length Tester is a multifunctional measuring tool for testing various network cables (categories 5E/6E) telephone coaxial cables and common wires. The device is used for testing cables up to 1 000 meters (3 280ft) long. The kit includes 8...

The Ermenrich NetGeeks NL80 Cable Length Tester can measure cable lengths up to 1 000 meters and also has other features. It can test cables for open circuits and short circuits as well as split crossed and reversed pairs. It can also measure the...

Ermenrich Ping SM110 is a multifunctional tester for cable tracing length measurement and testing of different types of cables. It also allows you to check the status of telephone lines and detect polarity. Option to run a PoE test. The device has a Flash...

The Ermenrich NetGeeks NP60 combines the functionality of a cable tester cable length tester and optical multimeter. It is an excellent choice for installing testing and operating twisted pair cable networks including those used in high-speed Internet connections. It is a great tool for...

The Ermenrich Ping SM150 Underground Wire Locator includes a transmitter receiver and additional accessories. It is used for the inspection and maintenance of cable and electrical networks water and gas pipelines buried in the ground or located in the walls or footings of buildings....

The Ermenrich NetGeeks NP40 multifunctional is a digital cable tester that is designed for tracing twisted pair and telephony testing lines for faults and installation errors measuring cable lengths and the distance to open or short circuits. The device will become an effective tool...

The Ermenrich Ping SM100 is designed for tracing cables in walls and ceilings as well as cables buried underground. The maximum detection depth is 2 meters (6.6ft). The device can find de-energized and energized cables i.e. it can be used to trace cables hidden...

The Ermenrich Ping SM80 Underground Wire Detector is designed to detect low voltage or zero voltage single-core and two-core parallel cables that are low or zero voltage as well as buried deep in the ground or hidden in walls. It can be used for...

The Ermenrich NetGeeks NP35 tester is designed for testing and tracing cables. It enables you to identify installation errors or faults in network and low-current systems: short circuits open circuits crossed pairs. The Port Flash function can quickly identify the network port to which...

The Ermenrich Zing TC20 Digital Multimeter is a portable device for measuring DC/AC voltage DC/AC current resistance and capacitance. It doesn’t have a rotary switch i.e. the measuring limit is set automatically. Protected against overloads the device is reliable and stable and provides a...

The Ermenrich Seek TV50 is suitable for a wide range of applications. When inspecting electrical equipment with a thermal camera hidden faults such as overheated contacts can be detected. The Ermenrich Seek TV50 helps to find thermal leaks in facades and foundations when inspecting...

The Ermenrich Ping SM90 is a 3-in-1 device that combines the functionality of a stud detector laser tape measure and digital level. This makes it a multifunctional tool for apartment renovation site construction equipment installation and wall finishing. Simple operation makes it easy to...

Ermenrich Ping SM70 Stud Detector is a device for detecting metal objects (pipes rebar self-tapping screws) live wiring wooden structures hidden in walls floors and ceilings. It is required to ensure the safety of construction repair finishing and installation works. For example when drilling...

The Ermenrich Ping ES20 Wall Pipe Blockage Detector is designed to locate blockages in metal and non-metal pipes made of steel copper iron PVC plastic or cement. It is a great tool for checking the condition of water pipes and sewer pipes for both...

Ermenrich NetGeeks NP25 is a PoE cable tester for PoE-powered networks. It is used for setting up IP telephony deploying IP surveillance systems connecting wireless access points etc. The Ermenrich NetGeeks NP25 supports all types of PoE devices. It can check the serviceability of...

The Ermenrich NetGeeks NP10 is a cable and PoE tester designed for testing network and telephone cables for Ethernet power open circuits short circuits as well as for identifying the location of the power supply equipment: either midspan (in the middle of the cable...

The Ermenrich NetGeeks NP30 cable tester is designed for checking network cables locating open circuits and measuring the length of a cable. The device will come in handy for anyone who installs troubleshoots and maintains computer networks and telephone lines but it can also...

Ermenrich Reel SLR640 Laser Tape Measure can measure the length height and width of an object structure or plot of land and quickly calculate its area and volume. It is a practical tool used for renovation and construction work and interior decoration carpentry and...

Ermenrich Reel BD30 is a GPS Land Meter that is designed for measuring a plot of land of any shape and terrain. It may include agricultural land orchards forests water areas industrial warehouses beaches etc. The device is compact and lightweight with intuitive controls...

The Ermenrich Tunn PD20 is a cordless screwdriver for screwing and unscrewing small fasteners with a possibility to work in dark locations and narrow spots. Suitable for assembling disassembling and repairing small devices and gadgets: laptops smartphones photo and video cameras glasses etc. The...

The Ermenrich Reel WM30 is a digital measuring wheel that measures distances from 0 to 100 000 meters. There is an option to select the units of measurement: meters/centimeters and feet/inch. The 32cm wheel makes it easy to measure long distances and the hard-wearing...

The diameter of the Ermenrich Reel WM20 digital measuring wheel is 32cm which makes it a great tool for measuring long distances. It works best on a flat surface but can also be used for measurements on complex terrain with height differences. The device...

The Ermenrich Reel WM10 digital measuring wheel is designed for measuring distances. The device is convenient for measuring different landscapes: flat and straight curved and area with elevation changes. You can use it indoors and outdoors. It is suitable for both home and professional...

The Ermenrich Seek VE70 borescope is equipped with two HD cameras to ensure the thorough inspection of narrow areas that are difficult to access. The camera is mounted on a 10-meter-long flexible gooseneck cable that allows you to reach distant areas and the LED...

The Ermenrich Seek VE60 industrial endoscope (borescope) with two HD cameras allows you to inspect hard-to-reach areas take photos and record video. It provides a good view: The front camera has a 70° viewing angle and the side camera – 70°. Both cameras are...

The Ermenrich Seek VE50 is an industrial endoscope (borescope) with a 5.5mm HD camera that provides a 70° viewing angle. With this device thanks to the flexible 10-meter-long gooseneck it is easy to inspect any hard-to-reach spots. It can be in-house pipes space inside...

The Ermenrich Seek VE40 industrial endoscope is designed for inspecting narrow areas in facilities machinery and equipment that are difficult to reach due to their location. Its functionality allows for repairing pipelines diagnosing car breakages checking appliances and wall structures inspecting vehicles at customs...

With the Ermenrich Ping SM60 Stud Detector you can easily and quickly detect hidden live cables in walls as well as fixtures and other metal and wood elements. The device will help you find the best spot for drilling holes and make the drilling...

The Ermenrich Ping SM30 is an easy-to-use tool with a built-in LCD screen that will help you locate hidden wiring and other objects in walls. It can be used in everyday life and for professional purposes by builders repairmen and installers. The detector can...

Ermenrich Ping SA30 is a portable stud detector that operates in several modes. It is a useful tool for builders installers repairmen and other professionals. It is also useful in everyday life. The detector uses electronic sensors to scan walls ceilings or floor surfaces...

Here is a practical tool for builders and repairmen – the Ermenrich Ping SA20 Stud Detector. This compact device can find metal and wooden objects located behind the walls floors and ceilings at a depth of up to 19mm. You can use it to...

The Ermenrich Ping SD20 Stud Detector is a small but very practical tool that is required for checking walls before drilling. You can quickly find out if there is wiring in the wall as well as hidden metal or wooden objects (e.g. fittings beams...

The Ermenrich Verk DR30 Digital Angle Finder Ruler is a handy 2-in-1 tool that will help you with various repair construction equipment and furniture installation tasks. It can measure angles between planes with high accuracy (only 0.3° error). It is also possible to measure...

The Ermenrich Verk DA40 Digital Angle Finder is a practical tool that can serve for a variety of construction and repair tasks. It comes in handy whenever you need to measure angles between surfaces accurately. In addition there is a miter mode for making...

The Ermenrich Verk LY80 is a digital level for accurate measurement of angles and positioning. It is suitable for a wide range of applications i.e. construction repair metal and woodworking installation of machines and mechanisms etc. Suitable for household use too (furniture installation placing...

The Ermenrich Verk LY60 is a mid-length digital level for the precise horizontal and vertical alignment of objects as well as measuring various angles. It is used to measure angles over a wide range – 0–360° (4x90°). It has built-in bubble vials so the...

The Ermenrich Verk LY40 Digital Level is a compact tool that combines the functionality of a digital angle meter and a standard bubble level. The level is designed for construction and repair work alignment in the process of installation and commissioning and accurate positioning...

The Ermenrich Verk LL100 is a digital level that combines the functionality of an angle meter a bubble level and a plumb. This tool is suitable for a wide range of construction and repair work machine and equipment assembly work placing workpieces on machine...

The Ermenrich Verk LL60 Digital Level is a versatile tool that is suitable for both professional and home use. The angles can be measured in a range of 0–360° (4x90°). Thanks to its high accuracy the device is suitable for construction sites and working...

Meet the Ermenrich Verk LQ40 a magnetic digital level that is suitable for a wide variety of applications. It can be used to level metal structures in construction and repair work as well as in manufacturing in order to measure the slope of some...

Ermenrich Verk LQ30 is a digital level that will become a great tool for any builder installer master of finishing works production machine operator etc. It will surely come in handy at home for repairs too. The device measures angles of slope within 360°...

Digital level Ermenrich Verk LQ20 – a universal device designed for leveling work during construction repair and finishing installation and manufacturing. The level can measure slope in degrees in four directions. High accuracy is one of the main advantages of the device – the...

Ermenrich Zing CT30 is an auto tester that measures the amount of current in the electrical circuit. The device must be installed in place of the vehicle’s fuse and the fuse must be inserted into the fuse jack to protect the circuit. The measurements...

The Ermenrich Zing AL30 is a battery tester i.e. a portable battery diagnostic tool. The basic battery test includes testing for voltage internal resistance and cold cranking amps (CCA). The device also has two additional modes of operation: car starting system testing and charging...

The Ermenrich Zing AL40 Battery Tester is designed to analyze the condition of the car battery as well as its performance and the main parameters. The device has a built-in screen and connects to the battery with two crocodile clips. You can operate the...

The Ermenrich Zing AL45 Battery Tester is an intuitive tool that enables you to quickly check the condition of the car battery or the uninterruptible power supply (UPS). The tester connects to an anode and cathode with two terminals. It is also the same...