La mayoría de nuestros pedidos se envían en 2 días laborables*.
Tenemos una política de devoluciones de 14 días. Si no está satisfecho con su compra, por favor devuélvala en su embalaje original y asegúrese de poner el embalaje original del producto dentro de la caja de envío para evitar cualquier daño. Todos los artículos deben estar en su estado original y sin usar. Se reembolsará el valor de su compra. No se reembolsarán los gastos de envío.
The Ermenrich Test DM70 is designed for professionals who work with electrical systems and electronics. It suits engineers, electricians, repair technicians, and commissioning specialists. The model combines a voltmeter, ammeter, ohmmeter, capacitance meter, frequency meter, and thermocouple, supports True RMS, and has a non-contact NCV detector with vibration and LED alerts. With this feature set, you can handle most diagnostic tasks without any extra tools.
The meter is built for a wide range of electrical measurements. It reads DC voltage on ranges from 600mV to 1000V and AC voltage on ranges from 6V to 1000V. This covers battery testing, control circuit diagnostics, and work on residential and industrial power systems, including three-phase lines and distribution panels. DC and AC current are measured on the 6A and 10A ranges, which is sufficient for checking the current draw of automotive components, heaters, and small motors. Resistance measurement is available on ranges from 600Ω to 60MΩ. The lower ranges are convenient for checking connection integrity and finding open circuits and shorts. The upper ranges are suited for measuring high-value resistors and detecting leakage.
Capacitance is measured on ranges from 40nF to 4mF, so the meter covers most capacitors that can be found in start circuits, power supplies, and household appliances. The thermocouple works from −20°C to +760°C. It lets you monitor the heating of contacts, motor windings, pipes, and heating elements. In continuity mode, the buzzer sounds when resistance drops below 100Ω. The frequency meter reads up to 10MHz and is suitable for checking switching power supplies, generators, sensors, and mains frequency.
The meter takes 2 readings per second and supports data hold and min/max recording. The 6000-count backlit display is easy to read in any lighting. With CAT III 600V and CAT II 1000V ratings, the model is cleared for work on industrial power systems and distribution panels. Power comes from a 9V 6F22 battery, good for up to 80 hours of operation. Auto power-off after 15 minutes of inactivity conserves battery life. The ABS housing with thermoplastic elastomer withstands heavy daily use.
Key features:
The kit includes:
| Brand | Ermenrich |
| Warranty | 5 years |
| EAN | 5905555028675 |
| Package size (LxWxH) | 17x12x6 cm |
| Shipping Weight | 0.45 kg |
| Selection of the measuring limit | automatic |
| Basic functions | ammeter, capacitance meter, frequency meter, ohmmeter, thermocouple, voltmeter |
| DC voltage measuring limit | 600mV/6V/60V/600V: accuracy ±(0.5%+2); 1000V: accuracy ±(1.5%+2) |
| AC voltage measuring limit | 6V/60V/600V: accuracy ±(1.5%+10); 1000V: accuracy ±(2.0%+10) |
| DC current measuring limit | 6A/10A: accuracy ±(2.5%+5) |
| AC current measuring limit | 6A/10A: accuracy ±(3.0%+5) |
| Resistance measuring limit | 600Ω: accuracy ±(1.2%+4); 6kΩ: accuracy ±(1.0%+2); 60kΩ/600kΩ: accuracy ±(1.2%+2); 6MΩ: accuracy ±(2.0%+2); 60MΩ: accuracy ±(5.0%+10) |
| Capacity measuring limit | 40nF: accuracy ±(5.0%+50); 400nF/4µF/40µF: accuracy ±(3.0%+5); 400µF/4mF: accuracy ±(5.0%+5) |
| Frequency measurement limits | 9.999Hz/99.99Hz: accuracy ±(1.5%+5); 999.9Hz/9.999kHz/99.99kHz/999.9kHz: accuracy ±(1.2%+3); 10MHz: accuracy ±(1.5%+4) |
| Temperature measurement range | –20…+760 °C |
| Measurements per second | 2 |
| Wire mapping | yes |
| Continuity test | +, combined with resistance measurement mode (<100Ω) |
| Diodes test | yes |
| Diode test | +, test current 0.3mA, open-circuit voltage 1.0V DC |
| Non-contact voltage detection (NCV) | yes |
| True RMS | yes |
| Throughput capacitance | 50–60Hz |
| Hold function | yes |
| Limit value function (Min/Max) | yes |
| Voltage polarity detection | yes |
| Display | LCD |
| Display counts | 6000 |
| Display backlight | yes |
| Audible alerts | yes |
| Light alert | yes |
| Safety standards | EN 61010-1 |
| Overvoltage category | CAT II 1000V, CAT III 600V |
| Operating humidity range, % | 0 — 70 |
| Storage temperature range,°C | -20 — 60 |
| Operating temperature range,°C | 0… +50 (+32… +122) |
| Power supply | 9V battery 6F22 - 1 pc. |
| Low battery status indicator | yes |
| Auto power off | yes |
| Auto power off | 15 min. |
| Body | high-strength ABS plastic, thermoplastic elastomer |
Tenemos una política de devoluciones de 14 días. Si usted no está satisfecho con su compra, por favor devuélvalo en su embalaje original y asegúrese de poner el embalaje original del producto dentro de la caja de envío para evitar cualquier daño....
Todos los artículos deben estar en su estado original y sin usar. Se le reembolsará el valor de su compra. .
No se reembolsarán los gastos de envío.
Si la devolución se debe a un producto defectuoso, es posible que se le compensen los gastos de envío de la devolución.
Póngase en contacto con nosotros para obtener más detalles si necesita realizar una devolución....
- De 0 a 2 kg - gastos de envío: 12,50 euros.
- De 2,001 kg a 30 kg - gastos de envío: 17,00 euros.
- A partir de 30,001 kg - gastos de envío: 30,00 euros.
En caso de recogida en nuestro almacén o puntos de reventa - el envío es gratuito.
Gracias por suscribirse.
¡Este correo electrónico ha sido registrado!
